For the Earthworm Jim Mugg one thing was certain, I was going to have to take the head off of a Mighty Mugg in order to do a proper EWJ version. So I bought Mace Windu (Samuel L. Jackson).
Since I wanted to do a Gordon Freeman Mighty Mugg I bought a General Grievus figure since he comes with two light sabers, which could prove useful later on. After examining each of the muggs I found something unfavorable with the Gen. Grievus Mugg.
The head for this mugg seems to be made out of something similar to ping pong ball plastic. This would prove very difficult to take off since there's no give to such a hard plastic. Vinyl has plenty of give to it however and luckily Samuel L. Jackson's head is made out of Vinyl plastic. There is a way to tell the difference between the plastics each Mugg head is made out of although it may not be easy to do in the store. Please don't open the boxes in the store, there are collectors out there that like their boxes in pristine condition. If you look at the head closely you will probably be able to see a hint of a seam as highlighted above.
This should be a pretty good indicator that the mugg in question has a ping pong head. The other clue is that if you look closely enough, and I mean close, there is a little bit more texture to a vinyl head than a ping pong head. If you are lucky enough to happen across some loose Muggs at a flea market or someone's house, the easiest way to tell the difference is to peck on the head with a finger nail. The vinyl head has a duller sound to the harder plastic which has a sharper 'tick' sound to it.
Although there may be a few people out there who just long for a hernia, I would suggest not trying to pull it off straight out of the box. I was able to get the head off by pre-heating my kitchen oven to 150 degrees fahrenheit and then putting the figure in the oven on a pan for about 5-10 minutes. One has to be very careful in dealing with a kitchen oven, but by heating the Mighty Mugg up, the vinyl of the head is more malleable and so the head is easier to pry off. I feel that no more warning is due since people should know the Mighty Mugg will be hot when it comes out of the oven.
The head is hollow and fits very snugly on the torso.
The piece that fits in the head of the mighty mugg is hard plastic, and for this project will need to come off.
I'll post photos of my sculpture of EWJ's head next post so keep an eye out for that. My next task is to saw off the plastic piece seen above without damaging the torso, wish me luck.
